HYPACK 2009 v9.0 水文调查和处理软件 带虚拟狗

跳转至下载链接

HYPACK 2009 v9.0 水文调查和处理软件 带虚拟狗
  • 软件作者: 网络搜集
  • 软件大小: 268 MB
  • 下载次数: | 所属栏目: 水文水利
  • 软件语言: 英文软件
  • 需要金币: 220 金币 金币充值金币
  • 软件评级: ★★★★★
  • 更新时间: 2014-12-24
  • 软件授权: 破解软件
  • 插件情况:
  • 运行环境: WinXP,Win7,Win8
HYPACK是世界上使用最广泛的水文软件

HYPACK水文调查和处理软件
 
HYPACK提供了完成您的水文,侧扫和磁力检验要求所有必要的工具。与世界各地的4000多家用户,HYPACK为您提供必要的,以满足几乎所有的水文测量需求的工具。它提供的工具来设计您的调查,收集数据,适用修正探测,消除异常值,情节现场表,将数据导出到CAD,计算容积量,产生的轮廓,创建侧扫马赛克和创建/修改电子海图。
 
设计|调查|编辑|卷|侧扫|绘图|输出到CAD| TIN模型| ENC编辑器
 
设计工具
HYPACK包含让您快速设计您的调查强大的工具。设计工具允许您:
 
设置你的大地测量参数
导入背景图
DXF,DGN,S-57,TIF,MrSID格式,ARCS
配置测量设备
设备类型
连接信息
偏移信息
创建您的规划线
手动输入
平行与垂直模式
通道设计自动创建渠道,转向流域规划线和横截面轮廓。
先进的信道设计创造复杂的3D曲面的精确疏浚和体积计算。
 
HYPACK自动保存您的调查资料项目目录,让您能够快速加载以往的调查。它运行在Windows XP和Windows Vista。
 
HYPACK的调查方案为您提供了强大功能和灵活性,以迅速完成调查工作。调查接受来自GPS输入,距离 - 方位系统,回声测深仪,磁力计,遥测系统潮流,和超过200其他传感器。它还提供定位数据,为SIDE SCAN调查方案(HYPACK标准的一部分)和HYSWEEP多波束调查方案(HYPACK的可选模块)。
 
该调查程序允许你跟踪多个船只。你可以跟踪自己的调查船或船和拖鱼,或船只和ROV或多艘具有相同易于使用的程序。
 
 
HYPACK的时间戳和时钟同步程序是业内最好的。我们的调查程序是业内率先采用RTK GPS来确定的实时水位改正(RTK潮汐)。调查还记得屏幕布局和每次启动时恢复它。共享内存程序允许您与其他应用程序共享实时测量数据。
 
该3DTV程序可以同时与调查中运行,给你的船只或在表面模型ROV的位置惊人的实时可视化。
 
HYPACK提供图形编辑和探空选择程序,让您快速准备的调查数据,绘图,导出到CAD或其他一些最终产品。 HYPACK的单光束编辑器提供了:
 
图形审查和跟踪线和深度剖面编辑
显示声学曲线网络能够探测
显示器的设计模板和上一次调查概况
水位(潮)调整
实时遥测仪
手动输入潮
RTK潮
站之间调整潮
声速改正
有几个选项冠冕堂皇的降低,这取决于你的最终产品。
 
SORT:选择shoalest探测,防止覆写
CROSS SORT:选择随机探测,并把它们打包在狭小。
探地选择:选择最小/最大探测和填充之间。
映射器:一个分级例程可以选择最小值,最大值,平均值,最接近小区中心表示每个小区
 
HYPACK计算批量能力是无与伦比的。它可以计算批量无论是从部分跨渠道或曲面模型(TIN模型)。
 
剖面和VOLUMES程序快速计算批量的横截面轮廓线相比,每行通道设计模板和渠道overdepth模板。该计划是事实上的标准计算量由几个国家调查机构。超过20的方法可用来计算面积和材料的体积为每个轮廓段(左坡度,主声道,右斜率),它可以计算数量为单个勘测与设计模板,或用于预疏通与一个后-dredge比较。截面和卷可以读取上百个路段,计算量和发送所有部分的打印机/绘图仪在几秒钟的事。加入最新的功能是支持海滩卷沙滩增资项目。
 
HYPACK的TIN模型程序可以用来计算几种类型批量的。输入数据可以从单束,多波束或多个传感器测量。
 
储卷:计算一个储在用户定义水位的体积和表面积。
通道卷:计算锡面的批量与一组计划的线条和他们的渠道设计模板。
先进的信道设计卷:计算量TIN表面的数量与先进的通道设计创建了一个复杂的领域。
调查对调查卷:计算一个地区的两个不同的调查之间的音量量。
 
HYPACK是唯一的水文软件包,提供了侧扫收集,镶嵌和目标作为我们的包装标准的一部分。侧面SCAN调查方案支持模拟和数字端扫描,包括一些最新的双频率和高分辨率侧扫描。
 
HYPACK侧扫描处理的例程接受来自侧面扫描或从伪侧扫描可从许多多波束系统的输入。这也可以从多个侧面扫描厂家自己的日志软件处理XTF文件。
 
目标可以实时在SIDE SCAN MOSAIC程序来执行,或在后期处理。目标的测量工具可用于捕捉每一个目标的GeoTIF形象,使其长度,宽度和高度测量,并将其保存到一个目标书。目标书是RTF格式,并可以通过电子邮件发送,并在微软Word中的客户或家庭办公室审查。
 
在2008年HYPACK版本,地理编码器程序被整合为一个标准的侧扫描处理工具。地理编码器是由UNH-CCOM的卢西亚诺·丰塞卡博士开发和提供先进的镶嵌和底部的分类程序。
 
HYPACK的绘图程序(HYPLOT)允许您发送的数据文件的任意组合,以您的绘图仪或打印机或PDF文件。所有可显示在HYPACK背景文件也可以打印/绘制中HYPLOT。这样您就可以创造惊人的阴谋与你的背景文件,如邻照片(TIF),工程计划(DXF/ DGN),电子海图(电子海图,ARCS),叠加的水文调查数据。
 
HYPLOT有几个边框和标题栏选项,包括用于美国陆军工程兵团,中国和俄罗斯的国界。您可以绘制XY网格(或tics),局部投影LAT-长网格(或tics)和WGS-84纬度长的网格。
 
HYPLOT的另一大特点是来发送地块出到一个DXF文件的功能。这可以让你整个绘图板(带边框和标签!)转移到你的CAD / GIS包。
 
HYPACK知道,我们的许多用户都希望能够把他们的调查数据转化为他们的CAD/ GIS包。我们花了大量的时间和精力,以确保我们所有的文件都可以导出到DXF,DGN和ASCII格式输入到AutoCAD时,MicroStation,ArcInfo的和其他CAD / GIS包。
 
探测,tracklines,轮廓(平原和颜色填充),目标,规划线,边界及其他文件可以在出口程序转换为DXF或DGN。
 
在HYPLOT创建绘图表还可以导出到DXF。
 
在2009年HYPACK,我们开始导入/导出到谷歌地球KML格式。这使您可以叠加的调查数据作为一个图层谷歌地球。
 
HYPACK的TIN模型计划从调查数据创建曲面模型。锡(不规则三角网)的表面设置在底部的非常精确的渲染,并且可以用来产生惊人的图形,DXF轮廓,网格XYZ数据集,和体积计算。
 
该TIN模型程序还允许披TIF在表面模型上的用户。这意味着您可以覆盖面扫描马赛克或邻TIF文件上的3D海底。
 
在TIN模型接受来自单光束,多波束和多传感器数据集的输入。在TIN模型程序中的轮廓引擎允许用户控制线类型,重量,颜色,颜色填充和间隔。轮廓保存到DXF格式,在那里他们可以或者直接显示在HYPACK读入到您的CAD/ GIS包。
 
在TIN模型体积工具允许您计算以下批量:
 
TIN与级别(水库)
TIN与LNW(使用模板计划行)
TIN与TIN(体积历史地表以上)
TIN与CHN(复杂的疏浚领域先进的信道设计文件)。
 
HYPACK的ENC编辑器允许您修改现有的电子海图的S-57格式。无论你是想通过一个数字化TIF移动浮标,创建一个新的光,导入最新的调查数据,或创建一个ENC,电子海图EDITOR是可以执行你的基本ENC编辑任务的有力工具。在ENC编辑器提供了对S-57的功能完全归属,也可以显示来自AML IENC符号和信息。
 
在ENC编辑器也可以用于ENC图表实时验证。运行并排侧与HYPACK调查方案,用户可以标记目标(手动或使用手持式激光)的调查,然后查询ENC编辑器中,在这方面的功能列表。然后,用户可以决定是否将现有功能或创建在目标位置的新功能。
 
该ENC EDITOR是HYPACK的标准功能。
 

 

 
HYPACK: Hydrographic Survey and Processing Software
HYPACK is the most widely used hydrographic software package in the world. Here’s why.
 
HYPACK provides all of the tools necessary to complete your hydrographic, side scan and magnetometer survey requirements. With over 4,000 users around the world, HYPACK provides you with the tools necessary to meet almost any hydrographic survey requirement. It provides tools to design your survey, collect your data, apply corrections to soundings, remove outliers, plot field sheets, export data to CAD, compute volume quantities, generate contours, create side scan mosaics and create/modify electronic charts.
 
Design | Survey | Editing | Volumes | Side Scan | Plotting | Export to CAD | TIN MODEL | ENC editor
 
Design Tools
HYPACK contains powerful tools that let you quickly design your survey. Design tools allow you to:
 
Set your geodetic parameters
Import background charts
DXF, DGN, S-57, TIF, MrSid, ARCS
Configure your survey equipment
Equipment type
Connection information
Offset information
Create your planned lines
Manual entry
Parallel & Perpendicular patterns
CHANNEL DESIGN automatically creates planned lines and cross sectional profiles for channels and turning basins.
ADVANCED CHANNEL DESIGN creates complex 3D surfaces for precise dredging and volume computations.
 
HYPACK automatically stores your survey information to a project directory, allowing you to quickly load previous surveys. It runs under Windows XP and Windows Vista.
 
Survey
HYPACK’s SURVEY program provides you with the power and flexibility to quickly complete your survey work. SURVEY accepts input from GPS, range-azimuth systems, echosounders, magnetometers, telemetry tide systems, and over 200 other sensors. It also provides positioning data for our SIDE SCAN SURVEY program (a standard part of HYPACK) and the HYSWEEP Multibeam SURVEY program (an optional module of HYPACK).
 
The SURVEY program allows you to track multiple vessels. You can track your own survey vessel, or a vessel and a towfish, or a vessel and an ROV or multiple vessels with the same easy-to-use program.
 
 
HYPACK’s time stamping and clock synchronization routines are the industry’s best. Our SURVEY program was the industry’s first in using RTK GPS to determine real time water level corrections (RTK Tides). SURVEY remembers the screen layout and restores it each time you start. The SHARED MEMORY programs allow you to share real time SURVEY data with other applications.
 
The 3DTV program can be run simultaneously with SURVEY to give you stunning real-time visualizations of the vessel or ROV’s position over a surface model.
 
Editing
HYPACK provides graphical editing and sounding selection routines that allow you to quickly prepare your survey data for plotting, export to CAD or several other final products. The SINGLE BEAM EDITOR of HYPACK provides for:
 
Graphical review and editing of track lines and depth profiles
Display of acoustic profile for network capable soundings
Display of design templates and previous survey profiles
Water level (tides) adjustments
Real time telemetry gauges
Manually entered tides
RTK Tides
Tide Adjustments between stations
Sound Velocity corrections
There are several options for sounding reduction, depending on your final product.
 
SORT: Selects the shoalest soundings and prevents overwrites
CROSS SORT: Selects random soundings and packs them in tight.
SOUNDING SELECTION: Selects min/max soundings and fills in between.
MAPPER: A binning routine that can select minimum, maximum, average, closest to cell center to represent each cell
 
HYPACK ability to compute volume quantities is unsurpassed. It can compute volume quantities either from sections across channels or from surface models (TIN MODEL).
 
The CROSS SECTIONS AND VOLUMES program quickly computes volume quantities for cross sectional profile lines compared to the channel design template and channel overdepth template for each line. The program is the de facto standard for volume computations by several national survey agencies. Over 20 methods are available to compute the area and volume of material for each profile segment (left slope, main channel, right slope), it can compute quantities for a single survey versus the design template, or for a pre-dredge versus an after-dredge comparison. CROSS SECTION AND VOLUMES can read hundreds of sections, compute the volumes and send all of the sections to the printer/plotter in a matter of seconds. The latest capability added is support of beach volumes for beach replenishment projects.
 
The TIN MODEL program of HYPACK can be used to compute several types of volume quantities. Input data can be from single beam, multibeam or multiple transducer surveys.
 
Reservoir volumes: Computes the volume and surface area of a reservoir at user-defined water levels.
Channel volumes: Computes the volume quantities of the TIN surface versus a set of planned lines and their channel design templates.
ADVANCED CHANNEL DESIGN volumes: Computes volume quantities of the TIN surface versus a complex area created in ADVANCED CHANNEL DESIGN.
Survey versus Survey volumes: Computes the volume quantity between two different surveys of an area.
 
HYPACK is the only hydrographic software package that offers side scan collection, mosaicking and targeting as a standard part of our package. The SIDE SCAN SURVEY program supports analog and digital side scans, including some of the latest dual frequency and high resolution side scans.
 
HYPACK’s side scan processing routines accepts input from side scan or from the pseudo-side scan available from many multibeam systems. It can also handle XTF files from several side scan manufacturers own logging software.
 
Targeting can be performed in real time, or in post-processing in the SIDE SCAN MOSAIC program. Target measurement tools can be used to capture a GeoTIF image of each target, make measurements of its length, width and height, and save it to a Target Book. The Target Book is in Rich Text Format and can be e-mailed and reviewed by clients or home offices in Microsoft Word.
 
In HYPACK Version 2008, the GEOCODER program was integrated as a standard side scan processing tool. GEOCODER was developed by Dr. Luciano Fonseca of UNH-CCOM and provides advanced mosaicking and bottom classification routines.
 
HYPACK’s plotting program (HYPLOT) allows you to send any combination of data files to your plotter or printer or to a PDF file. All of the background files that can be displayed in HYPACK can also be printed/plotted in HYPLOT. This allows you to create stunning plots with your background files, such as ortho-photos (TIF), engineering plans (DXF/DGN), electronic charts (ENCs, ARCS), superimposed with your hydrographic survey data.
 
HYPLOT has several border and title block options, including the national borders used by USACE, China and Russia. You can plot X-Y grids (or tics), local projection lat-long grids (or tics) and WGS-84 lat-long grids.
 
Another BIG feature of HYPLOT is the ability to send the plots out to a DXF file. This allows you to transfer the entire plotting sheet (with borders and labels!) into your CAD/GIS package.
 
HYPACK knows that many of our users want to be able to bring their survey data into their CAD/GIS package. We have spent a lot of time and effort to make sure that all of our files can be exported to DXF, DGN and ASCII formats for input into AutoCAD, Microstation, ArcInfo and other CAD/GIS packages.
 
Soundings, tracklines, contours (plain and color-filled), targets, planned lines, borders and other files can be converted to DXF or DGN in the EXPORT program.
 
The plotting sheets created in HYPLOT can also be exported to DXF.
 
In HYPACK 2009, we begin our import/export to Google Earth’s KML format. This allows you to superimpose your survey data as a layer in Google Earth.
 
HYPACK’s TIN MODEL program creates surface models from your survey data. The TIN (Triangulated Irregular Networks) surfaces provided extremely accurate renderings of the bottom and can be used to generate stunning graphics, DXF contours, gridded XYZ data sets, and volume computations.
 
The TIN MODEL program also allows the user to drape a TIF on top of the surface model. This means you can overlay side scan mosaics or ortho-TIF files on the 3D seafloor.
 
The TIN MODEL accepts input from single beam, multibeam and multiple transducer data sets. The contouring engine inside the TIN MODEL program allows the user to control the line types, weights, colors, color fills and intervals. Contours are saved to DXF format, where they can be displayed in HYPACK or read directly into your CAD/GIS package.
 
The volume tools in TIN MODEL allow you to compute the following volume quantities:
 
TIN versus Level (Reservoir)
TIN versus LNW (Planned Line with templates)
TIN versus TIN (volume above historical surface)
TIN versus CHN (ADVANCED CHANNEL DESIGN file for complex dredge areas).
 
HYPACK’s ENC EDITOR allows you to modify existing ENCs in S-57 format. Whether you want to move a buoy, create a new light, import the latest survey data or create an ENC by digitizing a TIF, the ENC EDITOR is a powerful tool that can perform your basic ENC editing tasks. The ENC EDITOR provides for full attribution of S-57 features and can also display IENC symbols and information from AML.
 
The ENC EDITOR can also be used for real time verification of ENC charts. Running side-by-side with the HYPACK SURVEY program, the user can mark targets (manually or with a hand-held laser) in SURVEY and then query ENC EDITOR for a list of features in that area. The user can then decide whether to move existing features or to create a new feature at the target position.
 
The ENC EDITOR is a standard feature of HYPACK.
标签:HYPACK水文水文调查水文处理
版权所有: 非特殊声明均为本站原创文章,转载请注明出处: 46下载站-www.46xz.xyz
下载地址
下载说明

如果软件下载地址失效,请及时联系我们
☉本站不从事软件破解业务,我们的所有软件均来自网络搜集和网友提供给。
☉本站对该软件不拥有所有权,所有权归版权方所有。
☉本软件仅供学习研究之用不得用于商业,如用于商业用途,请购买正版
☉如无意中侵犯了您的权益,请及时联系我们(邮箱地址:www46xzcom@vip.qq.com)。我们将予以删除。