电路板PCB和电子系统级设计软件Altium Designer 15.0.14 中文版

跳转至下载链接

电路板PCB和电子系统级设计软件Altium Designer 15.0.14 中文版
  • 软件作者: 网络搜集
  • 软件大小: 3.2 GB
  • 下载次数: | 所属栏目: 电子电路
  • 软件语言: 简体中文
  • 需要金币: 90 金币 金币充值金币
  • 软件评级: ★★★★★
  • 更新时间: 2015-01-23
  • 软件授权: 破解软件
  • 插件情况:
  • 运行环境: Win7,Win8
Altium有限公司,电子设计自动化,原生3D PCB设计系统(Altium Designer)和嵌入式软件开发工具包(TASKING)的全球领导者,宣布了其专业的印刷电路板(PCB)和电子系统级设计软件,Altium Designer 15的发行。
 
Altium Designer15体现了Altium的持续承诺,生产的软件和解决方案,提高生产力和具有挑战性的电子设计项目过程中减少用户的压力。它反映了Altium的承诺,通过提供客户都希望产品和配套需求客户成功。在符合这些目标时,Altium Designer15包括设计下一代高速印刷电路板,并保持了领先的趋势,产业与新的制造输出标准的支持功能强大的新的增强功能。
 
高速信号引脚对
 
现代设计要求的速率信号传播达到每秒100千兆。设计这些规范在上一代的设计软件是具有挑战性的。这个过程需要传统的手动返工和精心策划的信号设计工具之外,通常在电子表格程序 - 造成额外的步骤,并引入大量的空间误差。与Altium Designer15新的引脚对功能已被添加到:
 
- 启用精确的长度和相位调整跨终端的组件。
- 启用长,相位和延迟调整遍历整个信号路径。
 
设计者将不再需要外部的软件或具有保持信号和渔网复杂列表,而是将能够规划和路径组的高速网更大的效率和准确性。
 
IPC-2581和Gerber X2支持
 
作为计算机辅助制造格式,传统的格柏有其标准的RS-274D发布的近35年前起源;许多人认为“标准格柏”是过时的。 Ucamco最近更新的RS-274X格柏X2把关键制造数据之前丢失,和国际线路板协会已经开发出了一个全新的标准,IPC-2581。使用旧格式时遇到模棱两可的或丢失的数据,如格柏RS-274X的两个解决问题,从而根据其设计的设计手头宽裕到制造,完全描述PCB:
 
- 铜层的图像。
- 电镀和未电镀孔,槽,路线,沟槽和微孔。
- PCB设计,外形和开孔的区域。
- 复杂的叠层地区。
- 刚性和柔性板领域。
- 材料规格。
- 制作笔记,公差和其他关键标准的合规性信息。
 
Altium Designer15引入了两种IPC-2581和Gerber X2支持,保持设计是最新的,同时给予他们拓宽了他们的选择PCB制造合作伙伴的选择。
 
随着基于稳固的客户反馈更多新的功能和日常维护时,Altium Designer15将增强电子工程的工作流程,减少设计师和制造商之间的沟通瓶颈。
 
版本15.0.14体形:40656
日期:2015年1月19日
 
- 4317旋转组件现在可以正确导出到DWF/ DXF格式(BC:4977)
- 当参数文件名是用来修复4892一代通过outputjobs PDF文件
- 日语翻译的4899固定的问题,防止PCB文件加载
 
版本15.0.13体形:40581
 
日期:2015年1月16日
 
- 4634长度计算,现在考虑到通孔引脚高度
- 4367修复的Protel PCB导出2.8
- 4401“创建从连接网络xSignals”命令现在有专门的对话框
- 4601问题层消失,而刚性-flex层堆栈工作
- 4656组件与@中的UniqueID现在正确地列入取放文件
- 4663格柏代嵌入式主板引用不存在的PCB文件不崩溃了
- 4738 Altium Designer不要在光谱的文件再挂起导入(BC:5054,BC:5047)
- 4747异常,同时与分割面的工作是固定的(BC:5059)
- 4825任务与DrillDrawing打印到PDF不会阻止发布跳马了
- 4207的选项“的修改始终repour多边形”已被添加到PCB编辑器 - Preferences对话框(BC:5010)的常规页。
- 4394 xSignal长度计算包括路径组件内部(如垫之间的最短路径)
- 4650 复制/粘贴在schlib组件之间的修复工作
- 从DBLIB安置4682能见度注释字段的恢复到旧的行为,并通过符号设置驱动(BC:4994)
- 4745繁体中文翻译进行了更新
- 4793解决问题,使用FoxirReader PDF文件打开
- 4812 Altium Designer检测组件间隙正常
- 通过Web浏览器下载发布的数据显示4833修复错误
- 4836设备支持报告不再崩溃
- 4845 IPC2581输出现在可以通过PCBReleaseView产生

Altium Designer 15改为中文界面:

Altium Designer 15.0.14调用中文界面的方法

 

Altium Limited, a global leader in Electronic Design Automation, native 3D PCB design systems (Altium Designer) and embedded software development toolkits (TASKING), announced the release of its professional printed circuit board (PCB) and electronic system level design software, Altium Designer 15.
 
Altium Designer 15 demonstrates the continuing commitment by Altium to produce software and solutions that increase productivity and reduce user stress during challenging electronics design projects. It reflects Altium’s commitment to supporting customer success by delivering products that customers both want and need. In keeping with these objectives, Altium Designer 15 includes powerful new enhancements for designing the next generation of high-speed printed circuit boards, and keeping up with the leading trends in industry with support for new fabrication output standards.
 
High Speed Signal Pin Pairs
 
Modern designs require signal propagation at rates up to 100 gigabits per second. Designing to these specifications in previous generation design software is challenging. This process traditionally required manual rework and careful signal planning outside of the design tool, typically in a spreadsheet program - causing additional steps and introducing lots of room for errors. With Altium Designer 15 a new Pin Pairs feature has been added to:
 
- Enable accurate length and phase tuning across termination components. 
- Enable length, phase and delay tuning traversing an entire signal path.
 
Designers will no longer require external software or have to maintain complex lists of signals and nets, but instead will be able to plan and route groups of high speed nets with much greater efficiency and accuracy.
 
IPC-2581 and Gerber X2 Support
 
As a Computer Aided Manufacturing format, traditional Gerber has its origins in standard RS-274D published almost 35 years ago; many consider “standard Gerber” to be out of date. Ucamco have recently updated RS-274X to Gerber X2 to incorporate critical fabrication data previously missing, and the International Printed Circuit association has developed an entirely new standard, IPC-2581. Both resolve issues of ambiguous or missing data encountered when using older formats such as Gerber RS-274X to hand off design to fabrication, completely describing a PCB according to its design:
 
- Copper layer images. 
- Plated and unplated holes, slots, routes, grooves and microvias.
- PCB design outline and cutout regions.
- Complex layer stack regions.
- Rigid and flexible board areas.
- Material specifications.
- Fabrication notes, tolerances, and other critical standards-compliance information.
 
Altium Designer 15 introduces support for both IPC-2581 and Gerber X2, keeping designers up to date while giving them a choice that broadens their selection of PCB fabrication partners.
 
Along with additional new features and ongoing maintenance based on solid customer feedback, Altium Designer 15 will enhance electronics engineering workflow and reduce communication bottlenecks between designers and manufacturers.
 
Version 15.0.14 Build: 40656
Date: 19 January 2015
 
- 4317 Rotation of components is now correctly exported to dwf/dxf formats (BC:4977)
- 4892 Fixed generation of pdf file via outputjobs when parametric file name is used
- 4899 Fixed issue of Japanese translation that prevents PCB document to be loaded
 
Version 15.0.13 Build: 40581
 
Date: 16 January 2015
 
- 4634 Length calculation is now taking into account through-hole pins height
- 4367 Fixed Protel PCB 2.8 export
- 4401 "Create xSignals from connected net" command now has dedicated dialog
- 4601 Issues with layer disappearance while working with rigid -flex layer stack
- 4656 Components with @ in UniqueID are now properly included into Pick&Place files
- 4663 Gerber generation of embedded board referencing non existent pcb document do not crashes anymore
- 4738 Altium Designer do not hangs anymore during Spectra files import (BC:5054, BC:5047)
- 4747 Exception while working with split planes was fixed (BC:5059)
- 4825 Task with DrillDrawing printed to pdf do not prevent release to Vault anymore
- 4207 The option "Always repour polygons on modification" has been added to the PCB Editor - General page of the Preferences dialog (BC:5010).
- 4394 xSignal length calculation includes path inside of the component (as shortest path between pads)
- 4650 Fixed work of copy/paste between components in schlib
- 4682 Visibility of Comment field on placement from DBLib restored to old behaviour and is driven by symbol setting (BC:4994)
- 4745 Chinese (Traditional) translation was updated
- 4793 Resolved problem with pdf file opening using FoxirReader
- 4812 Altium Designer detects Component Clearances correctly
- 4833 Fixed error with downloading released data via web browser
- 4836 Device Support Report no longer crashes
- 4845 IPC2581 output can now be generated via PCBReleaseView

标签:
版权所有: 非特殊声明均为本站原创文章,转载请注明出处: 46下载站-www.46xz.com
下载地址
下载说明

如果软件下载地址失效,请及时联系我们
☉本站不从事软件破解业务,我们的所有软件均来自网络搜集和网友提供给。
☉本站对该软件不拥有所有权,所有权归版权方所有。
☉本软件仅供学习研究之用不得用于商业,如用于商业用途,请购买正版
☉如无意中侵犯了您的权益,请及时联系我们(邮箱地址:www46xzcom@vip.qq.com)。我们将予以删除。